WSS
System
ISA’s WSS System is a great elevated solution for commercial roofs. Connection details can be seen below. Please refer to the WSS Installation Manual for the assembly details.
PSS Elevated
Systems
ISA’s WSS System is a great elevated solution for commercial roofs. Connection details can be seen below. Please refer to the WSS Installation Manual for the assembly details.
FSS Flush Mount
Systems
ISA’s FSS System is a great low profile solution for service station canopies and commercial roofs. Connection details can be seen below. Please refer to the FSS Installation Manual for the assembly details
FSS Awning
Systems
ISA’s FSS Awning Racking System is a great solution for those looking to attach to parapet walls. Connection details can be seen below. Please refer to the FSS Installation Manual for the assembly details
Solar Mounting System Components
ISA Rails
The Solar Mounting Components are designed to anchor and mount to the four ISA Rails:
- 3x2 Rail – Supports modules and provides frame bracing
- 4x3 Rail – Main Rail – to support 3x2 Module Rails
- 6x3 Rail – Higher capacity Main Rail and Sleeper Rail
- 9x3 Rail – Highest capacity Main Rail for bridging long spans
AN31 Angle Nut
ISA’s patented 1/6 turn Angle Nut is provides secure fastening on all strut systems. It drops in anywhere without the need to move modules. When combined with the the C-Clip and Waffle Clip it provides a mar-free module connection.
Strut to Strut Cleat
Anchors module rails to main support rails with Cleat, AN31 Angle Nut, and Lobed Flathead Screw.
One on each side of main rail assures no beam slippage after tightening.
C-Clip
The C-Clip Kit provides a secure end clip solution that flexes to assure good grip without marring the modules. Its flexibility allows for slight variations in module height for more secure fastening.
Waffle Clip
The CW Waffle Clip Kit provides a mid-clip solution to minimize concentrated loads on the module frames. It can be supplied with grounding WEBs to meet UL2703 requirements.
The Waffle Clip has been developed to lightly tighten the clamp on one module to hold it using the ‘open’ side, and retrieve the next module – without the first module slipping.
C-Clip
SA’s grounding kit provides module rail grounding to
satisfy UL 2703 requirements. A combination of the lisco 1/0 grounding lug and ISA’s piercing screw and AN31 Angle Nut provides a simple in-slot mounting/grounding process.
How We Help
- We help you define the best product solution for any type of roof structure.
- Estimates are available within 24 hours
- We can provide engineering/structural information for your proposals
- We can take care of the structural analysis of both the building and the racking
- We provide a 3D drawing for better visualization of the system with every proposal